14
• Kombo 43
Set up/Connection
NOTICE
If the device is subjected
to warm temperatures after
being cold (e.g. after trans-
port), condensation may occur
inside of it.
–
In this case, wait approx.
2 hours before you connect
and activate it.
Location tips
• Select a stable, level base.
• Make sure that the environment is
clean and free from dust.
• Select a location away from heat
sources and direct sunlight.
• Do not place any heavy objects on
the cables or the device.
CAUTION
Risk of injury/damage!
–
Lay the cables so that
they do not pose a tripping
hazard.
Connecting the speakers
Use the enclosed cables
(4)
or an
equivalent double-core speaker wire
with a diameter of at least 0.5 mm
2
to
connect the speakers. You can order
corresponding cables in our webshop
(www.teufelaudio.com) in the “Acces-
sories” area.
On the back side of the Kombo 43
are the SPEAKER connecting termi-
nals
(28)
for the “Right” and “Left”
speaker.
Here you can connect the speaker
cables directly or using pin plugs.
Only a direct connection is described
here.
The terminals are each marked red
(+) and black (-).
NOTICE
Make sure the polarity is
correct!
Connect the like coloured terminals.
Otherwise, the sound quality will
suffer. The strands of the speaker
single wire are marked with different
colours or shapes.
1. Split the speaker cables down to
approx. 30 mm on both ends and
strip approx. 10 mm of insulation
off.
