28
• Kombo 43
Station memory
Your radio can save 20 stations for
each of the two modes. You can then
easily select saved stations at the
touch of a button.
Saving stations manually
With the remote control:
1. Set the desired station as
described above.
2. Tap the SAVE button
(33)
“M – –” or “Memory – –” will
appear on the display panel.
3. Enter the desired two-digit memory
slot number (01–20) using the
number buttons 1...0
(32)
.
The message “Stored Preset xx”
will appear on the display panel
(7)
(the slot number will appear
instead of “xx”). The station has
now been saved.
The device will return to normal oper-
ation after three seconds of button
inactivity.
On the device:
–
Pushing and holding the PRESET
button
(18)
will save the set station
to the next free memory slot.
If the station has already been saved,
the message “Already Saved” will
appear.
Saving stations automatically
Hold the “SCAN” button
(47)
down
for a few seconds to start the auto-
matic station scan. The device saves
the first 20 stations for the mode. The
radio will then switch to the station in
memory 1.
You can also start this automatic
assignment via the menu (see
„Saving radio stations automatically“
onpage 28).
Selecting stations from the
memory
You can select the saved stations
with the number buttons 1...0
(32)
.
You can access the memory slots
with double-digit numbers with the
“10+” button
(58)
.
Or you access the memory slots
consecutively by tapping the PRESET
button
(18)
.
(18)
(7)
TEUFEL
(32)
(33)
(47)
(58)
