• IP 3000 BR Mk 2
29
In the menu functions, there are many parameters that
complicate or even prevent normal operation in the event
of incorrect settings. If you receiver is behaving “unusu-
ally”, you can restart the device:
1. Push the button
15
“ ” on the device.
2. Wait fi ve seconds.
3. Push the button
15
“ ” again.
Problem
Possible cause
Solution
Remote control doesn’t
work.
No line of sight between the remote con-
trol and the device.
Remove any obstacles.
Remote control not pointed properly.
Point the remote control towards the device.
Batteries inserted in the remote control with
incorrect polarity.
Insert the batteries the right way around (see
diagram in the battery compartment).
Batteries in the remote control are empty.
Insert new batteries.
Disk-Fach lässt sich nicht
öffnen.
Falsche Quelle eingestellt.
„DISC“ als Quelle einstellen (siehe Seite 11).
If this doesn’t help, you can reset the receiver to the fac-
tory default. This will set the parameters such as speaker
size or level back to the normal values (see “System”
menu on page 14).
