10
·
Decoderstation 5
With the included remote control you can fully
control all of the Decoderstation 5 settings from
the comfort of your sofa.
Standby
Activate the Decoderstation 5 using the standby
button of the remote control. Switches the de-
vice to active operation (press once) or back into
standby mode (by pressing again). You can always
tell if the device is ready for operation because
the background of the dial control will light up.
Mute
Pressing the button once will mute the Decoder-
station 5. If you press it again the appliance will
return to the level previously selected. The mute
status is shown in the display of the Decodersta-
tion 5.
You can select the required input using the se-
lection buttons on the remote control
5 1
Direct selection of the analogue 5.1 signal input
on the back of the decoder as input source.
Optical 1 · 2
These buttons select one of the two optical di-
gital inputs on the back of the decoder as input
source.
Coax 1 · 2
These buttons select one of the two coaxial di-
gital inputs on the back of the decoder as input
source.
TV · CD · Aux
Each of these buttons select one of the three ana-
logue stereo inputs on the back of the decoder
as input source.
Display
Pressing this button once switches the LC display
off. Pressing the button again switches the LC dis-
play back on.
Return
Pressing the return button once will end the cur-
rent screen menu or return to the default display
state.
Function: Remote control
