15
·
Motiv 5
Settings: DVD player · Receiver
¦
Decoderstation
Adjustment to the AV receiver
During operation on the AV receiver, the Motiv 5 is
dependent on the AV receiver being set-up correctly.
Only when the receiver’s decoder assigns the signals
optimally will all of the boxes of the Teufel speaker
set be activated, as the Motiv 5 itself has no built-
in decoder function. The set-up options for the AV
receiver differ greatly from appliance to appliance.
Please consult the handbook for your AV receiver.
Adjustment to the DVD player
with 5.1 analogue output
The Motiv 5 itself has no built-in decoder func-
tion. Therefore it is “dependent” on external de
-
coders when splitting the signals. This decoder is
a component of the DVD player software. Its set-
up options differ greatly from model to model.
Please consult the handbook for your DVD player.
The following basic settings
should always be made:
4
The front/centre/rear speakers should be
defined in the speaker set-up menu (speaker
management/bass management) of the DVD
player as
“small”
or
“normal”
(not “large”!).
4
Set the subwoofer to
“on”
or
“yes”
in the
speaker set-up menu.
4
The optimal cut-off frequency is 120Hz. 100Hz
or 150Hz are also possible.
4
Set the rocker switch of the subwoofer to
“Bypass”
.
The following basic settings
should always be made:
4
Our front/centre/rear speakers should be
defined in the speaker set-up menu (speaker
management/bass management) of the AV re
-
ceiver as
“small”
or
“normal”
or (not “large”!).
4
Set the subwoofer to
“on”
oder
“yes”
on the
speaker set-up menu.
4
The optimal cut-off frequency is 120Hz. 100Hz
or 150Hz are also possible.
4
Set the rocker switch of the subwoofer to
“Bypass”
.
Decoderstation settings
Please observe the detailed description in the
Teufel Decoderstation manual or consult the sup
-
port section on our website: www.teufelaudio.com.
