18
• Cinebar Pro
Analogue source
You can connect a source device with
analogue sound (e.g. a CD player or
TV set) to each AUX IN 1/2 jack
(12)
.
For each jack, you will need a stereo
cable with a 3.5-mm jack plug to do
so.
(11)
(12)
RESET
Optical-digital source
You can connect the optical digital
sound output of a source device to
the OPTICAL IN jack
(11)
. You will
need an optical cable with a TOSLINK
plug for this. Your source device
requires either an optical 3.5 mm
plug or also a TOSLINK plug.
Coaxial digital source
You can connect the coaxial digital
audio outputs of a source device to
the COAXIAL IN jack
(18)
. You will
need a coaxial cable with RCA plugs
to do so.
(16) (17) (18)
REAR OUT
Rear speakers
For 4.1 or 4.0 operation, connect the
rear channels (rear) to the analogue
output LINE OUT
(17)
.
You can connect a power amplifier or
active speaker but also a radio trans-
mission system to this jack. You will
need a stereo cable with a 3.5-mm
jack plug to do so.
If you use active speakers with a
radio connection (e.g. “Effect”),
enable the connection in the “Wire-
less” menu (see page 24).
Subwoofer
You can connect an active subwoofer
to the SUB OUT jack
(16)
using an
RCA cable.
If you use an active subwoofer with a
radio connection, enable the connec-
tion in the “Wireless” menu (see page
25).
