14
• Cinebar Pro
Setup/Wall Mounting
NOTICE
If the device is subjected
to warm temperatures after
being cold (e.g. after trans-
port), condensation may occur
inside of it.
–
In this case, wait approx. 2
hours before you connect
and activate it.
Setup location
The space in front of or under the TV
set is an ideal location.
Location tips
• Select a stable, level base.
In case of wall mounting, follow the
instructions in the next chapter.
• Make sure that the environment is
clean and free from dust.
• Select a location away from heat
sources and direct sunlight.
• Do not place any heavy objects on
the cables or the device.
Mounting the speaker
stand
To set up the Cinebar Pro on a table
etc., please mount the speaker
stand. For this, you will need a 3 mm
hex key.
1. Place the Cinebar Pro on a soft
base with the speaker cover grille
down.
2. Place the speaker stand
(3)
on
the corresponding recesses on
the back of the Cinebar Pro.
(3) (4)
3. Use two screws
(4)
to screw the
speaker stand tight.
NOTICE
The isolation pads can
produce discolouration on
sensitive surfaces.
–
On parquet, varnished wood
and similar surfaces, you
should stick felt gliders to the
rubber feet of the device or
put a blanket under it. This
will prevent discolouration of
the floor over the long term.
