16
• Cinebar LUX
CAUTION
Risk of injury/damage!
–
Only qualified persons may
mount the Cinebar LUX on
the wall.
–
The device may only be
mounted on a suitable,
solid wall. Special dowels or
anchors may be necessary
when mounting the product
on lightweight walls. Consult
a qualified professional in
this case.
–
Make sure that there are no
cables or pipes in the drilling
areas. Before you drill, use a
metal detector to check the
applicable areas. Otherwise,
there is a risk of electric
shock/short circuit!
1. Space the two keyhole openings
(13)
in the wall where you would
like to mount the Cinebar LUX at
a distance of 68 cm apart. Use a
ruler, pencil and spirit level for this.
2. Use a metal detector to check the
drill areas. If necessary, select
another area for mounting.
3. Use an 6 mm rock drill to drill
holes, which are approx. 50 mm
deep, at the marked positions.
4. Insert 2 dowels (ø 6 mm) all the
way in the drill holes.
5. Screw one screw (4 x 55 mm)
into each dowel until there is
approx. 13-15 mm of space
between the wall and the screw
head.
(13)
(13)
68 cm
6. Press the Cinebar LUX up against
the wall so that the screws vanish
in the keyhole openings
(13)
.
7. Now pull the Cinebar LUX down so
that the screws slip into the small
slot.
8. If applicable, screw the screws
further in or out until the
Cinebar LUX is securely mounted
on the wall.
