Tettex MIDAS 2881, Руководство по эксплуатации

Страница: 96 / 164

86 Software
TYPE
TYPE? <string> X X X X Sets or returns the type of the insulation.
If you want to set the insulation type,
<string> has to be a member of the
temperature correction file. See section
“
Menu Condition” for more information.
Otherwise the DDR Register will be set.
Example INSUL:TYPE "Liquids :Askarel"
CORRfacto
r? X X Returns the actual set temperature
correction factor
AMBient TEMPeratu
re X X X X Sets or returns the actual ambient
temperature. The unit corresponds to
the command "TEMP:UNIT".
HUMidity X X X X Sets or returns the actual ambient
humidity.
7.8.4 Measurement commands
Note: All values are formatted in the same way as on the display as f.e
"12.44 kV" for Voltages
"99.43 pF" for Capacitances,
"0.0033" for Dissipation, Power Factor, a.s. o.
Following units are possible:
"p" Pico 10
-12
"n" Nano 10
-9
"u" Mikro 10
-6
"m" Milli 10
-3
"k" Kilo
10
3
"M" Mega 10
6
'"G" Giga 10
9
If the system is ranging the system will answer with "--"
Command
header1 Command
header f2
or Arg. L
S L
A R
S R
A Commentary
ACCUracy? YES
NO
X X Returns "YES" if the accuracy of the measured signal is
enough. This value corresponds with the colour displayed
on the system. See section “Display of Measurement
Values
”
OVERflow? YES
NO
X X Returns "YES" if a signal has an overflow detected.
URMS? <Nx> X X Effective Voltage which is applied to the test object.
Answer similar as "12.434 kV"
DF? <Nx> X X Dissipation factor without temperature correction.
Answer similar as "0.0043 "