Tettex MIDAS 2881, Руководство по эксплуатации

Страница: 62 / 164

52 Software
Drop-down list "User Interface"”
This option allows to configure the software to be used
with a computer keyboard (Standard) or trough a touch
screen (Touchscreen)
If “Standard” is selected, values introduction in the
textboxes are done by typing in the keyboard. For
numerical inputs the engineering unit like kilo, nano a.s.o.
can be set by pressing
‘G’ Giga
’M’. Mega
’k’ Kilo
’m’ milli
’u’ mikro
’n’ nano
’p’ pico
after the number. The Unit like Volt will be automatically
added.
For “Touchscreen” a menu will popup every time you click
in a text filed, where you can enter the value by touching
the characters / units.
Drop-down list "User Input"”
If "Use Input Lists" is selected all inputs where stored in a
file. After pressing first few character all window will popup
with all stored values. So it is very easily to make you
inputs.
Button “Load Factory Settings”
After leaving the factory or after a recalibration, the values
of standard capacitor or cable length are tested and
stored. By clicking this button you will be asked, if you
want to use these settings.
Drop-down list "Line Printer"
This button is only available when an optional line printer is
connected to the MIDAS.
The button can have following different states.
No Printing there will be no printout.
Always a printout will be generated if
you press the button "Report" in
the “” or if you run a sequence
and additional measuring data
are stored
.
Only At Manual The printout will work only in the
“Manual” tap sheet.
Only at Sequence The printout will work only in the
“Sequence” tap sheet.
For information about the printout, see section “Strip
Printer”
Check box “Remote Access”
If this option is set the system is opened to be controlled
from a host computer. Remote access is granted.