CHAPTER 4
OPERATION
4-3
Displays of series DN-109NN, DN-119NN, DN-129NN and DN-189NN
Function of each parameter.
4.2.2.1
Parameter1: Type of numerical data.
Configure the datatype; text format (ASCII) or numeric types like Float or Word data (with
or without sign)
If the parameter selected is zero, the minimum value of this table will be saved (01). If
the value inserted is higher than the allowed, it will save the maximum value of this table
(05).
4.2.2.2
Parameter 2: Communication protocol
Define the communication protocol. The actual version of the DN-NN family only allows
the Profinet protocol.
Only “ 10” will be accepted in this equipment.
4.2.2.3
Parameter 3: Time without receiving data
This parameter specifies a time to warn that the equipment is not receiving data. The
warning occurs if the programmed time is exceeded.
If data is received within the specified time, the timer
is reset to zero. The code “00” (No
time) does not trigger any warning.
To indicate that the time limit has been exceeded, a dash will be displayed on each digit.
Code
Time
Code
Time
00
Without time
11
1 min.
01
2 s
12
2 min.
02
4 s
13
5 min.
03
6 s
14
10 min.
04
8 s
15
20 min.
05
10 s
16
40 min.
06
14 s
17
1 hours.
07
20 s
18
2 hours.
08
26 s
19
5 hours.
09
30 s
20
10 hours.
10
40 s
21
25 hours.
Parameter
Type
Numerical range
01
Float
-2147483648 a 2147483647
02
UFloat
0 a 4294967295
03
Word
-32768 a 32767
04
UWord
0 a 65535
05
ASCII
1 numerical character/digit
(maximum 10 characters)
Parameter
Protocol
10
Profinet
