TESY HL-254V PTC, Инструкции по использованию и хранению

Страница: 4 / 40

4
Usage and Storage Instructions
EN
•
In order to avoid dangerous overheating of the
supply cord, it is recommendable to unwind the
whole supply cord and the appliance to be operated
in accordance with the provided Operating
Instructions.
•
Do not use this appliance in the immediate
surrounds of a bath, a shower or a swimming pool.
•
The heater must not be located immediately below
a socket- outlet.
•
Children of less than 3 years should be kept away
unless continuously supervised.
•
Children aged from 3 years and less than 8 years
shall only switch on/off the appliance provided
that is has been placed or installed in its intended
normal operating position and they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazard involved.
•
Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance
or perform user maintenance..
Some parts of this product can become very hot
and cause burns. Particular attention has to be
given where children and vulnerable people are
present.
OPERATION
1.
Connect the appliance to the power outlet.
2. The appliance emits a beep and the power indicator
light (G) comes on and remains on as long as the
appliance is powered.
3. The appliance goes into OFF. If the display shows a
blinking dot, it means that the tip over switch has
been activated. See paragraph: “Additional safety
features” page 6.
4.
Press the ON/OFF button (A) to turn on the
appliance. It will begin to heat with the predefined
settings.
5.
Press the MODE button (E) to select one of the
following functions available:
Heating 1 , Heating 2 , Heating 3
ECO , Ventilation , Antifreeze
•
Ventilation In this operating mode only the fan
operates, so the appliance does not heat the room.
•
Anti-freeze In this operating mode the appliance
keeps the room at a temperature of 7°C to prevent
freezing temperatures.
•
Heating 1 and Heating 2 and Heating 3
You can’t adjust the temperature on present mode!
•
Heating 1 (minimum power level): The appliance
operates at the mini-mum power, reducing noise
and energy consumption to the minimum.
•
Heating 2 (midding power level): The appliance
operates at the midding power for rapid heating of
the room.
•
Heating 3/BOOST function (maximum power
level): The appliance operates at the maxi-mum
power for rapid heating of the room.
6.
Eco function In this operating mode the
appliance will Equipment can be set according
to automatically adjust the temperature of high,
medium and low-grade operation mode, the
highest temperature of yongding to 32 degrees.
When the environment temperature below the
high set temperature 1 to 4 degrees, equipment will
be low mid-range cycle operation heating; When
the environment temperature below the high set
temperature 4 degrees above, equipment will be
running by the upscale circulation heat. Equipment
will be according to the environment needs to
automatically adjust the heating gear
7.
If you want the appliance to distribute the airflow
over a larger area, press the oscillation button (C).
The appliance will then oscillate right and left. To
stop the oscillation in the desired position, just press
oscillation button (C) again.
8. To turn off the appliance press button ON / OFF(A). The
display will show a countdown for about 6 seconds.
Note: The display can show the temperature in both
°F and °C. To change the temperature scale, press
and hold the “+””-“ key for 3 seconds, then release.
Please be informed that as this is not a precision device,
the showed temperature not necessary corresponds to the
real one.