6
Operation and Storage Manual
EN
When the room temperature is lower than the
temperature that you have set by the thermo regulator,
the panel heater starts its operation and will operate
until the room temperature reaches the set temperature
level of the unit. When the room temperature is higher
than the adjusted temperature of the appliance, the
panel heater will automatically go into “Stand by” mode.
PROTECTION
•
The appliance is equipped with a safety thermo turn-
off device, which automatically turns the heater off in
cases of extreme temperature of the panel heater /i.e.
overheating of the appliance/.
•
The safety thermo turn-off device will automatically
restore the heater operation when the temperature
of the appliance falls below the permissible ultimate
values.
TIP-OVER PROTECTION
This heater is protected with a safety switch that turns off
the appliance automatically when the heater falls over,
or is at an excessive angle from the horizontal. This helps
prevent accidents, and the heater will back to last set
mode when it is put back upright.
CLEANING
•
It is compulsory first to turn off the appliance
through its power switch and to disconnect it from
the power socket. Before starting the cleaning
session you should wait until the panel heater cools
down in a disconnected state.
•
Clean the heater body with damp cloth, vacuum
cleaner or a brush.
•
Never immerse the appliance into water – there is
danger for your life from electric shock!
•
Never use gasoline, thinner or hard abrasive
products to clean the appliance, because they will
damage the appliance coating.
STORAGE
•
Before putting the panel heater away let it cool
down after you have disconnected it from the
power socket
•
Use the appliance original packing to store it,
if the panel heater will not be in use for a long
period of time. By storing the product in its original
packing you protect it from excessive dirt and dust
accumulation.
•
Never put a hot panel heater in its packing!
•
It is necessary the product to be stored at a dry and
dark place, protected from direct sun light.
•
It is explicitly forbidden to store the panel heater in
damp and wet premises.
MAINTENANCE OPERATIONS OF THE APPLIANCE
•
In case of appliance malfunction, please contact the
authorized service center closest to your location. /
service centers are indicated in appliance warranty
documents/.
•
Important
: In case of a claim and/or violation of
your consumer rights, please contact the supplier of
this appliance at the indicated locations or via the
Internet page of the company: www.tesy.com
DIMENSIONS OF HEATED VOLUME AND HEATED
AREA OF A ROOM / APPLIANCE MODELS
Model
Heated volume Heated area
CN 03 050 MIS F
- 500W
10* - 15 m
3
4* - 6 m
2
CN 03 100 MIS F
- 1000W
20* - 30 m
3
8* - 12 m
2
CN 03 150 MIS F
- 1500W
30* - 45 m
3
12* - 18 m
2
CN 03 200 MIS F
- 2000W
40* - 60 m
3
16* - 24 m
2
CN 03 250 MIS F
- 2500W
50* - 70 m
3
20* - 28 m
2
CN 03 300 MIS F
- 3000W
60* - 80 m
3
24* - 32 m
2
* Minimum guaranteed heated volume (area) for heating at an average
capacity of heat transmission factor λ=0.5 W/(m
2
K) for a heated room.
Higher values of heated volume (area) can be achieved at an average
value of λ=0.35 W/ (m
2
K). Standard height of heated rooms – 2.5 meters.
Warning: Do not cover the appliance
in order to prevent overheating!
Environment protection instructions
Obsolete electric appliances contain valuable
materials and consequently they should not
be treated as domestic waste! We ask for your
cooperation and your active contribution to protect
the resources and the environment. Please submit
your out-of-use appliances to the organized buy-back
stations (if there are such).
