TESTO 925 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 19

background image

24

Instruments with radio module 915.00MHz FSK

Warning: Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the

receiver is needed.

· Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
· this device may not cause harmful interference, and
· this device must accept any interference received, including interference that may

cause undesired operation.

2.

Intended purpose

This chapter gives the areas of application for which the

product is intended.
Use the product only for those applications for which it was
designed. Ask Testo if you are in any doubt.
testo 925 is a compact measuring instrument for
measuring temperatures.
The product was designed for the following
tasks/applications:

· HVAC applications
· Measuring surface temperatures

The product should not be used in the following areas:

· Areas at risk of explosion
· Diagnostic measurements for medical purposes

1. Safety advice

1.888.610.7664

[email protected]

www.

Testo-Direct

.com

«
...
2
3
4
5
6
...
»

Содержание 925




















Отзывы:

Нет отзывов

Похожие инструкции для 925

Бренд: Cockpit Страницы: 7

Бренд: Omega Страницы: 3

Бренд: Radio Thermostat Страницы: 19

Бренд: Radio Thermostat Страницы: 7

Бренд: Daikin Страницы: 8

Бренд: OJ Страницы: 8

Бренд: Strom Страницы: 28

Бренд: Engineered Comfort Страницы: 34

Бренд: Haswill Страницы: 2

Бренд: VDH Страницы: 4

Бренд: Trane Страницы: 2

Бренд: TUV Страницы: 5

TP5000 si range

Бренд: Danfoss Страницы: 32

Бренд: oventrop Страницы: 16

Бренд: Salus Страницы: 20

Бренд: White Rodgers Страницы: 2

Бренд: Panasonic Страницы: 191

Бренд: Eco4us Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды