TESTO 925 Скачать руководство пользователя страница 16

Страница: 16 / 19

Care and maintenance

This chapter describes the steps that help to maintain the

functionality of the product and extend its service life.

Cleaning tthe hhousing:

Clean the housing with a moist cloth (soap suds) if it
is dirty. Do not use aggressive cleaning agents or
solvents!

Changing tthe bbattery/rechargeable bbattery:

The instrument is switched off.

To open the battery compartment on the rear of the
instrument, push the lid of the compartment in the
direction of the arrow and remove it.

Remove the spent battery/rechargeable battery and
insert a new battery/rechargeable battery (9 V mono-
bloc). Observe the polarity!

To close the battery compartment, replace the lid of
the compartment in position and push it against the
direction of the arrow.

If the voltage supply had been interrupted for a long
period, the date/time and unit of measurement will have
to be reset:

- The instrument switches itself on and configuration

mode is opened.

Set the date/time and unit of measurement.

See the chapter

ERFORMING SETTINGS

, objectives

ETTING THE DATE

TIME

and following.

7. Care and maintenance

1.888.610.7664

[email protected]

www.

Testo-Direct

.com

Содержание 925




















Результаты поиска

Содержание 925

Отзывы:

Похожие инструкции для 925

Бренды по названию

Популярные бренды

TESTO 925, Инструкция по эксплуатации

Результаты поиска

Содержание 925

Отзывы:

Похожие инструкции для 925

Бренды по названию

Популярные бренды