TESTO 6781 Скачать руководство пользователя страница 16

Страница: 16 / 76

4 Transmitter

Pos: 29 /TD/Produktbeschreibung/Übersicht/MUF 63xx/Display und Tastatur 6781 @ 4\mod_1250064749770_79.doc @ 47423 @ 3 @ 1

4.2.3.

Display and keypad

The display option allows operation of the testo 6781 transmitter via
the display and four keys.

The LCD display consists of one 7-segment line for displaying
readings and units and of an information line (for status messages,
for example).

The brightness and contrast of the display and the background
lighting (permanent or off) can be changed via the user menu or the
P2A software.

Pos: 30 /TD/Überschriften/MUF/4.2.x Serviceschnittstelle @ 3\mod_1237306891654_79.doc @ 29795 @ 3 @ 1

4.2.4.

Service interface

Pos: 31 /TD/Produktbeschreibung/Übersicht/MUF 63xx/Serviceschnittstelle 635x @ 3\mod_1237217388492_79.doc @ 29723 @ @ 1

The parameterizing socket (mini-DIN) is located behind the service
flap as an interface to the P2A software.

Pos: 32 /TD/Produktbeschreibung/Übersicht/MUF 63xx/Analogausgänge 635x @ 3\mod_1234774510463_79.doc @ 25726 @ 3 @ 1

4.2.5.

Analog outputs

As analog outputs, the testo 6781 has either

•

1 current output of 0 to 20 mA (4-wire)/4 to 20 mA (4-wire) or

•

1 voltage output of 0 to 1 V/0 to 5 V/0 to 10 V (4-wire)

Pos: 33 /TD/Produktbeschreibung/Übersicht/MUF 63xx/Messgrößen 6781 @ 3\mod_1239284685066_79.doc @ 31095 @ 3 @ 1

4.2.6.

Parameters

The following parameters are displayed:

•

Relative humidity in % RH (technical)

•

Degree of humidity in g/kg and gr/lb

•

Absolute humidity in g/m³ and gr/ft³

•

Water content in ppm (vol)

•

Dewpoint temperature in °C

and °F

•

Standardized dewpoint (at atmospheric pressure 1013 hPa) in
°C

tdA

and °F

tdA

•

Temperature °C and °F

Pos: 34 /TD/Produktbeschreibung/Übersicht/MUF 63xx/Skalierung @ 3\mod_1234775406989_79.doc @ 25783 @ 3 @ 1

Содержание 6781













































































Результаты поиска

Содержание 6781

Отзывы:

TESTO 6781, Инструкция по эксплуатации, Страница: 16 / 76

Результаты поиска

Содержание 6781

Отзывы: