6. Measurement examples
39
Messprogramm konfiguriert
- Overview of programmed long-term measurement appears.
8 Confirm measurement program with
.
- Measurement program takes effect and is configured:
9 Press function key
.
- Long-term measurement begins:
The
symbol shows which program is currently running.
Long-term measurement starts with fresh air/rinse phase:
Fresh air time between measuring cycles:
Minimum and maximum measuring and fresh air cycles:
Measuring cycles:
2 min to 240 min (4 h)
Fresh air cycles:
5 min to 1440 min (24 h)
10
ends the programmed measurement ahead of time.
- The measuring program remains activated (indicated by the symbol
).
- Generally, there is a rinsing phase of 2 minutes after the measuring program is
finished (pump slow).
6.2.3 Restarting measuring program
Press function
key.
- Measuring program starts again.
6.2.4 Deleting programming in instrument
1 Select –> –>
–>
.
Measuring program is only deactivated and is not deleted.
2 Select –> –>
.
- The last measuring program activated is shown.
3 Press the
function button to reactivate.
Info
Program
Memory
Delete
Program
Memory
Start
Stop
Start
Fresh aair rrinse
Z
Zeroing 11 Z
Zeroing 22 E
Exposure tto g
gas
t in min
Constant 6min
Measure
0 1 2 3 4 5 6
Rinse F
Fresh aair Z
Zeroing 11 Z
Zeroing 22 E
Exposure tto g
gas
t
Set fresh air time
Measure
Rinsing is ended once
rinse limits are reached.
Measuring program in progress
