Creating a new location:
Locations are identified by a unique location name. Each location name can only be allo-
cated once.
1
New location
.
2 Select
Location name
.
3 Enter values
OK Save input
.
4 Execute steps 2 and 3 for the other criteria accordingly (only testo 330-2, -3 /
testo 330-2LL).
5
OK Go to measurement
or
OK TO memory/location
.
Ordering a list (testo 330-2, -3):
1
Locations list
.
2 Select the order criterion:
,
(only testo 330-2, -3 / testo 330-2LL) or
(only testo 330-2, -3 / testo 330-2LL).
Restoring a list (testo 330-2, -3):
1 Order the list in the sequence in which the locations were created:
Restore list
.
Activating a location:
Select the location
.
- The location is activated and the
Measurements
menu is opened.
Printing/displaying protocols:
If automatic furnace data are stored with a measurement protocol the following symbol
is displayed next to the protocol name:
. The data are printed with the protocol
printout.
1 Select the location
.
Options:
To print all data of the chosen location:
Print all
.
To delete all data of the chosen location:
Delete all
.
2 To print a single data: Select the protocol
.
-oor-
2 To display saved readings of a measurement: Select the protocol
.
Options:
To print the protocol:
.
To delete the protocol:
.
Del
Value
OK
OK
Protoc.
OK
OK
Addr’
Name
Locat
OK
OK
OK
change
OK
E. Operation
E.5 Memory/Location
24
