manualshive.com logo in svg

TESTO 325M, Инструкция по эксплуатации

Поделиться
Скачать
TESTO 325M Скачать руководство пользователя страница 23

23

8. Maintenance

8.1 Changing rechargeable batteries / 

batteries

Switch off the analyser before opening it!

Connect the analyser to the mains unit (accessories),
otherwise the analyser settings (e.g. date/time ...) and the
readings retained in the analyser are lost.
Saved Readings (

testo 325XL

only) do not get lost!

1 Place analyser on its front and open and remove battery

compartment cover at the back of the analyser.

2 Remove spent rechargeable batteries/batteries from the

battery compartment.

3 Place new rechargeable batteries/batteries in the battery

compartment. Insert correctly (+/-).

-

The analyser switches off once the rechargeable batteries /
batteries are inserted!

4 Close cover on battery compartment.

Changing the rechargeable battery block

The rechargeable battery block ( 

testo 325XL

only) is

changed in the same way as the rechargeable
batteries/batteries, however it must be connected to the white
socket in the battery compartment via the plug-in connection

➀

and held in position in the battery compartment via the

available adapter 

➁

.

8.2 Emptying the condensate trap

Switch off analyser before emptying the condensate trap!

1 Hold analyser with the condensate trap outlet in an upward

position and remove the plugs 

➀

somewhat from the outlet

opening.

The condensate is made up a weak acidic mixture. Avoid contact
with skin.

2 Empty condensate into container.

3 Close off outlet using plugs.

➀

➁

➀

Содержание 325M





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды