TESTO 0699 6446 Series, Инструкция по эксплуатации

Страница: 3 / 44

Contents
3
Contents Page
1 Introduction 4
1.1 Notes on the instruction manual 4
1.2 Receiving inspection, transport, storage 5
1.3 Scope of delivery 6
2 Warranty 9
3 Description of the instrument 10
3.1 Task and areas of application 10
3.2 Technical data 12
3.2.1 Measuring block 12
3.2.2 Thermal mass flow sensor 14
3.3 Accessories 17
3.3.1 Sealing cap (0699 6446/41) 17
3.3.2 Connecting cable with electrical isolator (0699 6446/42) 17
3.3.3 Replacement for electronic sensor assembly (0699 6446/31 or 0699 6447/31) 17
3.3.4 Additional ISO calibration points (0699 6447/22) 18
3.3.5 DAkkS calibration (0699 6447/23) 18
3.3.6 Additional DAkkS calibration points (0699 6447/24) 18
4 Security measures 19
4.1 Intended purpose 19
4.2 Assembly, commissioning and operation 20
5 Installation 21
5.1 Description of PBCOmpac
®
flange 21
5.2 Welded connection to pipeline with PBCOmpac
®
flange 22
5.3 Determining the installation point 22
5.3.1 Installation position 23
5.3.2 Required measurement route 23
5.3.3 Direction of flow 24
5.4 Installation of the electronic sensor assembly in the measuring block (version 0699 6446) 24
5.5 Installation of the electronic sensor assembly in the interchangeable fitting (version 0699 6447) 26
5.6 Electrical connection 27
5.6.1 4-wire pin assignment 27
5.6.2 5-wire pin assignment (accessory) 28
6 Operation 29
6.1 Removal of the electronic sensor assembly under pressure (only 0699 6477) 29
6.1.1 Electronic sensor assembly in the measurement position (OPEN) 29
6.1.2 Remove electronic sensor assembly (CLOSE) 30
6.2 Thermal mass flow sensor 30
6.2.1 Operation and display elements 30
6.2.2 Types of operation 31
6.2.3 Programming 32
6.2.4 Adjustable parameters 33
6.2.5 Error messages 36
6.2.6 Menu overview 37
6.3 Changing the electronic sensor assembly (version 0699 6446) 38
6.4 Changing the electronic sensor assembly (version 0699 6447) 38
6.5 Cleaning the sensor 39
6.6 Cleaning agents 39
6.7 Calibration 39
7 Troubleshooting 40
7.1 Service address 40
7.2 Exchange of damaged parts 40
7.3 Exchange of O-rings and sealing ring 40
7.4 Return shipment 40
7.5 Disposal 40