8
Controls via testo Smart App
32
Setting the absolute pressure (testo 512-1
only)
The absolute pressure is required for pressure compensation of the
flow velocity reading.
The absolute pressure must be measured using a separate instrument
or obtained from the local weather station.
The
Settings
tab is open.
1
Enter the value for the absolute pressure and confirm with
OK
.
The changes are transferred to the measuring instrument and
synchronization with the app is confirmed on the measuring instrument
via “SYNC DONE”.
Display of the readings
The available readings can be displayed in different views.
Live view:
The readings transmitted by the measuring probes can be displayed in a live
view. Readings from all connected measuring probes are displayed.
Graphic view:
Up to four different readings can be displayed in graph format. Readings to
be displayed can be selected by tapping on a reading above the diagram.
Table view:
In the table view, all readings are displayed in sequence according to date
and time. Different readings from the individual measuring probes can be
displayed by pressing ◄ ►.
Adjusting the view
1
Click on
.
2
Select
Edit view
.
An overview of all measurement channels and their measurement
parameters is displayed.
