TESSERA TK-78K0R/KG3+UD, Руководство пользователя

Страница: 75 / 125

3.14.2 PER test / receiver
The Menu 2 sets the board to the receiver in the PER test.
If you have two PCs, you can connect two boards to each of two PCs, then,
you will apply this mode to one of them.
In your current case, your receiver board is now being connected to the
debugger. Therefore, you cannot access to these menu to utilize this mode
setting. Alternatively, you have set the receiver board to the receiver mode
by setting the switch 1-8.
3.14.3 Continuous TX / Pseudo Noise
The Menu 3 initiates the modulated RF transmission. The data carried are
pseudo random numbers. You can define the channel using the menu 9,
and the output power using the menu 0.
3.14.4 Continuous TX / Raw carrier
The Menu 4 initiates the carrier transmission. The output power is not 0 dB
as a reset default. You can define the channel using the menu 9.
3.14.5 RX Mode
The Menu 5 initiates the receiver mode.
3.14.6 IDLE MODE
The Menu 6 sets the UZ2400 into the IDLE mode.
3.14.7 Standby MODE
The Menu 8 sets the UZ2400 into the Standby mode.
- 75 -