TESSERA TK-78K0R/KG3+UD, Руководство пользователя

Страница: 100 / 125

5.2.4 Operation
The coordinator generates beacon at channel 11 of 2405 MHz.
LED4 on the board is ON.
An end device makes a network association. If successful, LED2 on the
board is ON.
If you push SW3 on an end device, LED4 on the coordinator blinks.
And, if you push SW4 on an end device, LED3 on the coordinator blinks.
The number of times of blink depends on the sequence the end device joined
in the network. For instance, if an end device is the third end device for the
network, the LED will blink three times.
LED on Coordinator SW on End Device
LED2 SW3
LED3 SW4
The following example shows, the SW3 on the fifth end device, “4356”, was
pushed. You will see the LED2 on the coordinator will blink 5 times.
The default PAN ID of this network is “2420”.
- 100 -