Tools and Equipment:
• T10 Torx bit
WARNING:
Do not service the Wall Connector while it is energized. Turn off power to the Wall
Connector at the upstream circuit breaker prior to servicing.
1. TURN OFF POWER TO THE WALL CONNECTOR AT THE CIRCUIT BREAKER. Wait 5 minutes for the
Wall Connector to completely de-energize.
2. Remove the main unit from the wirebox.
3. Use a T10 Torx bit to remove the 2 screws securing the faceplate to the main unit.
4. Push the faceplate slightly downward to release it from the 2 sliding tabs at the top of the main unit.
Remove the faceplate.
REMOVING FACEPLATE
2
Replacing Faceplate of Gen 3 Wall Connector
