Tools and Equipment:
• T10 Torx bit
1. Position the faceplate on top of the main unit so the 2 screw pegs at the bottom of the faceplate
touch the bottom edge of the main unit.
2. Center the top of the faceplate in the main unit so the 2 tabs at the top of the faceplate align with
the 2 tabs at the top of the main unit.
3. With the 2 sliding tabs aligned, push the faceplate upward until the 2 tabs securely connect.
4. Verify that the faceplate is seated securely and sits slightly higher than the main unit at the top.
5. Secure the faceplate to the main unit with 2 screws using a T10 Torx bit. Hand-tighten the screws.
INSTALLING FACEPLATE
3
Replacing Faceplate of Gen 3 Wall Connector
