background image

4

ENG

WARNINGS AND PRECAUTIONS

Read all of the instruction before operating the set. Keep the instruction for later use. 

• 

Use only the attachments/accessories specified or provided by the manufacturer (such as 
the exclusive supply adapter, battery etc).

• 

Please refer to the information on exterior back enclosure for electrical and safety information 
before installing or operating the device. 

• 

To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. 

• 

The ventilation should not be impeded by covering the ventilation openings with items, such 
as newspaper, table-cloths, curtains, etc. 

• 

The device should not be exposed to dripping or splashing and no liquid-containing vessels, 
such as vases, should be placed on the device. 

• 

The terminals marked with the symbol “   ”may have sufficient power to pose a  risk of 
electric shock. The external wiring connected to the terminals has to be installed by a 
trained person or ready-made leads or cords should be used.

• 

To prevent injury, this device must be safely attached to the floor/wall in accordance with the 
installation instructions. 

• 

Danger of explosion if battery is incorrectly replaced. Replace only with the same or 
equivalent battery type. 

• 

The battery (battery or batteries or battery pack) should not be exposed to excessive heat 
such as sunshine, fire or the like. 

• 

Excessive sound pressure from earphones and headphones can cause hearing loss. 

• 

Listening to music at high volume levels and for prolonged periods of time can damage your 
hearing. In order to reduce the risk of damage to hearing, one should lower the volume to a 
safe, comfortable level, and reduce the amount of time spent listening loud music. 

• 

If the mains plug or appliance coupler is used to disconnect the device, it should be easily 
approached. 

• 

When not used or when being moved, please take care of the power cord set, e.g. tie up 
the power cord set with cable tie or the like. It should be protected from sharp edges and 
the like that can cause damage to the power cord set. When you decide to use it again, 
please make sure that the power cord set is not damaged. If you discover any damages, 
please contact a service person to replace the damaged power cord set with the one 
specified by the manufacturer or having the same characteristics as the original one. 

• 

Symbols, markings, signal lamps or similar indicators show that the device is completely 
disconnected from the mains. 

• 

Attention should be drawn to environmental aspects of battery disposal. 

• 

No open flame sources, such as lighted candles, should be placed on the device.

• 

 

   To prevent the spread of fire, always keep candles or other open flame sources away 

from this product. 

• 

Each USB terminal should be loaded with 500mA under normal operation. 

• 

 

   Protective earthing terminal. A CLASS I device should be connected to MAINS 

socket outlet with a protective earthing connection. 

Warnings

Содержание S49D302B2

























Отзывы: