Tesla MODEL Y 2022, Руководство пользователя

Страница: 199 / 261

2. Release the rear tow eye cover by pressing firmly on
its top right perimeter until it pivots inward, then
gently pulling the raised section toward you.
NOTE: Vehicles equipped with a hitch receiver cannot
be pulled from the rear tow eye. Use the tow bar or
hitch receiver only to pull the vehicle to a safe
location, such as onto a flatbed truck. Do not
transport the vehicle with wheels on the ground.
3. Fully insert the tow eye into the opening, then turn it
counter-clockwise until securely fastened.
4. Attach the winch cable to the tow eye.
CAUTION: Before pulling, make sure the tow
eye is securely tightened.
5. Activate Transport Mode.
6. Pull Model Y slowly onto the flatbed truck.
Secure the Tires
The vehicle's tires must be secured onto the truck using
the eight-point tie-down method:
• Ensure any metal parts on the tie-down straps do not
contact painted surfaces or the face of the wheels.
• Do not place tie-down straps over the body panels or
through the wheels.
CAUTION: Attaching the tie-down straps to the
chassis, suspension or other parts of the vehicle's
body may cause damage.
Jump Starting the Low Voltage
Battery
If jump starting Model Y using another vehicle, refer to
that vehicle manufacturer's instructions. The following
instructions assume you are using an external low
voltage power supply (such as a portable jump starter).
To determine whether your vehicle is equipped with a
Lead-Acid or Lithium-Ion Battery, navigate to Controls >
Software > Additional vehicle information .
CAUTION: Model Y cannot be used to jump start
another vehicle. Doing so can result in damage.
CAUTION: Avoid short circuits when jump starting
Model Y. Connecting cables to the wrong
terminals, touching leads together, etc., can result
in damage to Model Y.
Instructions for Transporters
197 Roadside Assistance