3. Remove the cabin intake trim panel by
pulling it upwards to release the trim clips
that hold it in place.
4. Connect the 12V power supply's red
positive (+) cable to the red positive (+)
terminal on the 12V battery.
CAUTION:
To avoid damaging
Model 3, do not allow the positive
cable to contact other metal
components, such as the battery
tie-down bracket.
5. Connect the 12V power supply's black
negative (-) cable to the black negative (-)
terminal on the 12V battery.
6. Turn on the external power supply (refer
to the manufacturer’s instructions). Touch
the touchscreen to wake it up.
NOTE:
It may take several minutes to
receive enough power to wake up the
touchscreen.
7. When external 12V power is no longer
required, disconnect both cables from the
terminals on the 12V battery, beginning
with the black negative (-) cable.
8. Replace the cabin intake trim panel by
placing it back in its original location and
pressing down until it is secure.
9. Replace the maintenance panel by
placing it back in its original location and
pressing down until it is secure.
10. Close the hood.
Instructions for Transporters
238
MODEL 3 OWNER'S MANUAL
Содержание MODEL 3 2020
