1. Perform visual checks to make sure it is
safe and appropriate to move into the
target lane
2. Fully engage the appropriate turn signal
and initiate the lane change by having your
hands on the steering wheel.
3. Disengage the turn signal after you are in
the target lane.
NOTE:
Auto Lane Change cancels if the lane
change cannot be completed in five seconds.
Auto Lane Change assists in moving Model 3
into the adjacent lane in the direction
indicated by the turn signal, provided the
following conditions are met:
• Auto Lane Change detected your hands
on the steering wheel.
• The turn signal is fully engaged.
• The ultrasonic sensors and Autopilot
cameras do not detect a vehicle or obstacle
up to the center of the target lane.
• The lane markings indicate that a lane
change is permitted.
• The view of the camera(s) is not
obstructed.
• Your vehicle does not detect another
vehicle in its blind spot.
• Midway through the lane change, Auto
Lane Change can detect the outside lane
marking of the target lane.
• Driving speed is at least 45 km/h.
As the lane change is in progress, Overtake
Acceleration is activated, allowing Model 3 to
accelerate closer to a vehicle in front (see
Overtake Acceleration on page 115
). Midway
through the lane change, Auto Lane Change
must detect the target lane's outside lane
marking. If this lane marking cannot be
detected, the lane change is aborted and
Model 3 returns to its original driving lane.
NOTE:
Auto Lane Change assists in moving
Model 3 one lane at a time. Moving into an
additional lane requires you to engage the
turn signal a second time after the first lane
change is complete.
When using Auto Lane Change, it is
important to monitor its performance by
watching the driving path in front of you and
the surrounding area. Stay prepared to take
over steering at any time. As you are crossing
over into the adjacent lane, the touchscreen
displays the lane marking as a dashed blue
line. Once in your new lane, lane markings are
displayed as solid blue lines again.
In situations where Auto Lane Change is
unable to operate at optimal performance, or
cannot operate due to inadequate data, the
touchscreen displays a series of warnings.
Therefore, when using Auto Lane Change,
always pay attention to the touchscreen and
be prepared to manually steer Model 3.
Limitations
Autosteer and its associated functions are
particularly unlikely to operate as intended
when:
• Autosteer is unable to accurately
determine lane markings. For example, lane
markings are excessively worn, have visible
previous markings, have been adjusted due
to road construction, are changing quickly
(lanes branching off, crossing over, or
merging), objects or landscape features are
casting strong shadows on the lane
markings, or the road surface contains
pavement seams or other high-contrast
lines.
• Visibility is poor (heavy rain, snow, fog,
etc.) or weather conditions are interfering
with sensor operation.
• A camera(s) or sensor(s) is obstructed,
covered, or damaged.
• Driving on hills.
• Approaching a toll booth.
• Driving on a road that has sharp curves or
is excessively rough.
• Bright light (such as direct sunlight) is
interfering with the view of the camera(s).
• The sensors are affected by other
electrical equipment or devices that
generate ultrasonic waves.
• A vehicle is detected in your blind spot
when you engage the turn signal.
Autosteer
121
Autopilot
Содержание MODEL 3 2020
