• The flash drive must be USB 2.0
compatible. If using a USB 3.0 flash drive, it
must be able to support USB 2.0.
• Use a dedicated flash drive exclusively for
saving Sentry Mode recordings.
• The flash drive must be properly
formatted (see
• Use a flash drive with as much available
storage as possible. Video footage can
occupy a large amount of space. Tesla
recommends using a flash drive with at
least 32 GB of storage. Some personal
computer operating systems may be
unable to format flash drives larger than 32
GB as FAT 32. Consider using a third party
application to format flash drives larger
than 32 GB.
Although not a comprehensive list, Tesla has
tested the following flash drives and
confirmed that they meet the requirements
for using Dashcam and Sentry Mode:
• SanDisk Ultra Fit USB 3.1 Flash Drive
• Samsung MUF-64AB/AM FIT Plus –
200MB/s USB 3.1 Flash Drive
Formatting the USB Flash Drive
To correctly save and retrieve video footage,
Model 3 requires the USB flash drive to be
formatted as FAT 32 (for Windows), MS-DOS
FAT (for Mac), ext3, or ext4. NTFS and exFAT
are not currently supported. In addition, the
USB flash drive must contain a base-level
folder called “TeslaCam” (without quotation
marks). Follow the steps below to prepare a
USB flash drive.
For MacOS:
1. Insert the USB flash drive into your
personal computer.
2. Navigate to
Utilities
>
Disk Utility
(or
conduct a Spotlight Search).
3. Select your flash drive in the left menu.
4. Navigate to
Erase
in the top menu
ribbon.
5. In the pop-up menu, select the correct
format (MS-DOS FAT) and click
Erase
.
NOTE:
Selecting
Erase
removes all existing
content from your flash drive. If you have
content that you want to keep, you must
move it to a different device before erasing.
6. Once the flash drive is successfully
erased, navigate to
Finder
and select your
USB flash drive from the left menu. The
flash drive should not contain any files.
7. Right-click in the empty space of the
flash drive and select
New Folder
. A folder
appears in your flash drive space.
8. Right-click on the folder, select
Rename
,
and name the folder to “
TeslaCam
”
(without quotation marks). Click "Save".
This folder will contain all recent and saved
clips from Sentry Mode and Dashcam.
9. Properly eject the USB flash drive.
For Windows:
1. Insert the USB flash drive into your
personal computer.
2. Navigate to
File Explorer
.
3. Right-click on your USB flash drive and
select "Format...".
4. In the pop-up menu, under the File
System section, select “FAT 32”.
NOTE:
You can also name your USB flash
drive (under Volume Label) for easier
recognition.
5. Check the
Quick format
box and click
Start
.
6. Go back to File Explorer, click on your
flash drive, and right-click to create a
folder, or select
New Folder
in the top
menu.
7. Name the folder “
TeslaCam
” (without
quotation marks) and click
Save
. This folder
will contain all recent and saved clips from
Sentry Mode and Dashcam.
8. Properly eject the USB flash drive.
Once you have formatted the USB flash drive
and created the
TeslaCam
folder, insert it into
one of the front USB ports in Model 3. Do not
use the rear USB ports—they are for charging
only. It may take Model 3 up to 15 seconds to
recognize the flash drive. When recognized,
icons for Dashcam and Sentry Mode appear
at the top of your touchscreen (note that you
Security Settings
178
MODEL 3 OWNER'S MANUAL
Содержание MODEL 3 2020
