Tesla K43D301B2S, Руководство по эксплуатации

Страница: 9 / 24

9
ENG
remote control
Method for installation of remote control Battery
precautions for using the remote control:
Remove the battery compartment cover and insert two AAA (No� 7, 1�5V) batteries; make sure the polarity of the
batteries is in accordance with the polarity marks „+“ and „-“ in the battery compartment of the remote control�
1� Power LED indicator and remote receiving window�
2� Power switch (optional): press „
I ” end to turn power on, and press „ O ” end to turn power off�
3� SOURCE ( ) : Press this key to enter the menu and select signal source; during OSD menu operations, press this
key to confirm the operation, with the same function as the ''OK'' key on the remote control�
4� CH+/CH- ( ) : Channel up/down key; during OSD menu operation, press the keys to select items, with the
same function as the  /  key on the remote control�
5� VOL+/VOL- ( ) : Volume up/down key; during OSD menu operation, press the keys to adjust the analog
value, with the same function as the  /  key on the remote control�
6� MENU ( ) : Press this key to show the setup menu�
7� Standby : To switch the TV on or back to standby�
Note:
1. The appearance varies depending on the model, and the actual product shall prevail.
2. The „
SOURCE
“ and „
MENU
“ keys are invalid in smart mode; in this case, please operate with the remote control.
1� The remote control should be pointed at the remote control sensor during operation� An object placed between the
remote control and the remote control sensor may impede normal operation�
2� The remote control should be prevented from strenuous vibration� Besides, please do not set or place the remote
control under direct sunshine, as heating power may result in deformation of the remote control�
3� Remote control failure may occur when the remote control sensor of the main unit is under direct sunlight or strong
lighting; in this case, please change the angle of lighting or this TV set, or operate the remote control near the
remote control sensor�
4� Low battery will influence the remote control distance, in which case, the battery should be replaced with a new one�
If the remote control is going to be idle for a long time or the battery runs out, please take the battery out to prevent
the remote control from being corroded by battery leakage which may result in damage and failure of the remote
control�
5� Please do not use batteries of different types� It is not allowed to use old and new batteries together; the batteries
should be replaced in pair�
6� Please do not throw the batteries into fire or charge or decompose the batteries; do not charge, short- circuit,
disassemble/assemble, heat or burn used batteries� Please dispose the waste batteries pursuant to relevant
regulations on environmental protection�