5
1 SAFETY INSTRUCTIONS
These operating instructions form an integral part of the equipment and must be available to the operating
personnel at all times. All the safety instructions and advice notes are to be observed.
DANGER!
It is imperative that you read the following safety instructions and all safety ins-
tructions in the manuals of connected peripheral systems before installing and
starting this test system for the first time.
DANGER!
The electrical and mechanical safety equipment must not be removed, put out of
operation or bypassed. Handle all safety equipment with care. If a safety device
should be broken or is not working, the system must be put out of operation until
the safety device is repaired or exchanged and fully in working order again.
DANGER!
HAZARDOUS AREA! Connectors on the test equipment must not be touched!
Only connect and disconnect the DUT and/or fixture when the “SYSTEM STOP“
button is pressed.
The equipment may only be operated within an area that is explicitly declared a
«Test Floor» (with appropriate signs) and protected against improper access.
