Tescom NEOLINE PLUS 1102ST, Руководство пользователя

Страница: 27 / 38

27
USER MANUAL
NEOLINE PLUS � 1/1 � 1-3 kVA � ONLINE UPS
27
3-2. LCD panel
Display Function
Remaining backup time information
Indicates the remaining backup time in pie chart.
Indicates the remaining backup time in numbers.
H: hours, M: minute, S: second
Fault information
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and the codes are listed in details in 3-5
section.
Mute operation
Indicates that the UPS alarm is disabled.
Output & Battery voltage information
Indicates the output voltage, frequency or battery voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Load information
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
OVERLOAD
Indicates overload.
SHORT
Indicates the load or the UPS output is short circuit.
EN
12
3. Operations
3-1. Button operation
Button Function
ON/Mute Button

Turn on the UPS: Press and hold ON/Mute button for at least 2 seconds
to turn on the UPS.

Mute the alarm: When the UPS is on battery mode, press and hold this
button for at least 5 seconds to disable or enable the alarm system. But
it
’
s not applied to the situations when warnings or errors occur.

Up key: Press this button to display previous selection in UPS setting
mode.

Switch to UPS self-test mode: Press and hold ON/Mute button for 5
seconds to enter UPS self-testing while in AC mode, ECO mode, or
converter mode.
OFF/Enter Button

Turn off the UPS: Press and hold this button at least 2 seconds to turn
off the UPS. UPS will be in standby mode under power normal or
transfer to Bypass mode if the Bypass enable setting by pressing this
button.

Confirm selection key: Press this button to confirm selection in UPS
setting mode.
Select Button

Switch LCD message: Press this button to change the LCD message for
input voltage, input frequency, battery voltage, output voltage and
output frequency. It will return back to default display when pausing
for 10 seconds.

Setting mode: Press and hold this button for 5 seconds to enter UPS
setting mode when UPS is in standby mode or bypass mode.

Down key: Press this button to display next selection in UPS setting
mode.
ON/Mute + Select
Button

Switch to bypass mode: When the main power is normal, press
ON/Mute and Select buttons simultaneously for 5 seconds. Then UPS
will enter to bypass mode. This action will be ineffective when the
input voltage is out of acceptable range.
3-2. LCD Panel