ACT6000 User Guide
– January 2021 Page 3 of 52
1.
General Description
The
ACT6000
combines various kinds of transmission, metallic and special tests. It can be
considered to be the most advanced Test Set today for qualifying and maintenance of
advanced transmission systems and copper pairs used for various telecommunication
services: from VOICE to VDSL.
One of
ACT6000’s
most interesting features is the new high resolution color graphic
display, a real
“window” on the most advanced measurements’ world.
The alphanumeric keypad, as well as the
function-keys,
grant to the instrument a high
operating level. Moreover, take note that, due to its accurate and intuitive
“Human Machine
and Graphics User
Interface”, this instrument needs the help of the user’s manual to
arrange and carry out unusual measurements and/or settings.
One
ACT6000
, suitably configured, can perform easily and quickly
“Single-End Line Tests”
or very accurate
“End-to-End Tests” together with another
ACT6000
. The wide range of
measurements of the
ACT6000
allows the qualification and certification of various
communication carriers and copper pairs used for digital streams with a frequency span up
to 6 MHz (or 35 MHz optional); moreover, the instrument can automatically extrapolate the
ADSL and VDSL maximum expected data rate of the copper line under test.
ACT6000
can be configured for in-depth analysis, by special functions and internal optional
modules. The complete adoption of these modules allows the simple and fast finding of
anomalies and/or faults on the copper line and communication systems.
Package
The package of the instrument (base version) contains: the soft-pack
carrying case, this User Guide, the AC / DC battery-charger,
Banana/Crocodile cables and Ground Cable. Make sure that, on receipt,
this pack and its contents have not been damaged by bumps or
careless handling. For possible shipment of the instrument for repair or
calibration it is suggested to use the original pack.
Instrument identification
The Part-Number, Serial Number, Hardware Configuration, and date of production or
Calibration are pointed out on the factory label applied on the rear panel.
Copyright advice
The information contained in this document is the property of TesCom and is supplied
without responsibility for mistakes and omissions. No part of this document can be
reproduced without the specific authorization of TesCom.
TesCom reserves the right to make modifications of any nature to the present document
without notice. All rights are reserved.
TESCOM
20200 Algreg St, Pflugerville, TX, USA
Tel. +1 - 800-888-1978