Tesco VCU10P, Руководство пользователя, Страница: 9 / 12

VCU10P Vacuum Cleaner User Guide
Lift out
to clean
Cleaning Pre-Motor & Exhaust Filters
Check these filters whenever you remove the dust cup for
emptying and clean them when necessary.
A
B. Exhaust Filter
Press down on the tab and lift the cover off.
Lift the filter insert out from the cover.
Rinse in lukewarm water. A very soiled filter should be
thoroughly washed with fresh tepid water. with a drop of mild
detergent. Rinse well. Let the filter air dry for 24 hours.
Now re-install the filter insert in the cover and replace the cover
in the cleaner.
A. Pre-Motor Filter
Remove the dust cup. Lift the pre-motor filter insert out. Rinse in
lukewarm water. A very soiled filter should be thoroughly
washed with fresh tepid water. with a drop of mild detergent.
Rinse well. Let the filter air dry for 24 hours before re-installing.
B
Page 9
IMPORTANT NOTICE
If at any time you notice that the brush speed is slow and/or there is a loss of suction, this may be
caused by the brush getting clogged.
If this happens, switch the cleaner off and unplug it from the mains. Clean the brush area fully and
remove all obstructions before continuing to use the cleaner.
Prompt action will maintain cleaner performance and avoid any potential problems of belt slippage.