Tesco VCU10P Скачать руководство пользователя страница 7

Emptying the Dust Cup

Set the cleaner upright, switch 
off and unplug.

Empty the dust cup regularly to 
m a i n t a i n   t h e   e f f i c i e n t  
performance of the cleaner.

The  maximum  dirt  level  is 
marked on the Dust Cup.

You must empty the Dust Cup 
before  the  dirt  reaches  the 
MAX mark. 

Failure to do this may impair the 
efficiency of the cleaner.

Hold  the  Dust  up 
by the handle and 
press the dust cUp 
r e l e a s e   c a t c h  
down.

Hinge the cup out of its cradle.

Carefully  remove  the  dust  cup  from  the  cleaner,  keeping  it 
vertical.

Invert the dust cup over a bin. Press the catch on the lid which 
will pop open. Shake and tap the dust cup lightly to remove as 
much dust as possible. Close the lid. 

If you are still vacuuming, replace the cup.

When you have finished cleaning you must clean the two 
filters in the cup after emptying it. This is essential. Refer to 
the next page for details.

Cleaning and Replacing the Filters

It is essential to inspect clean the filters regularly. The period between inspections will depend on how often and for how long you 
use the cleaner. 

The filter in the dust cup should be cleaned whenever you empty the dust.

 The motor inlet and exhaust 

filters should be checked after every three cleaning sessions. 

If the cleaner shows any sign of losing suction, switch off, check and clean the filters and if necessary, clear any blockage.

NEVER operate the cleaner with clogged filters, you could damage the cleaner motor.

Before you examine or clean the filters, Set the cleaner fully upright. Switch off and unplug from the mains. 

Filter Locations

Debris Screen

Pre-Motor Filter

Exhaust Filter

(behind cover)

HEPA Filter

(Inside Dust Cup Lid)

The  HEPA  Filter  stops  nearly  all  dust 
particles  and  airborne  allergens  from 
re-entering the air you breathe.

Clean this filter every time you use 
the  cleaner.  Failure  to  do  this  will 
impair  performance  and  may 
damage the cleaner motor. 

You  should  also  check  and  clean  the   
debris screen regularly.

VCU10P Vacuum Cleaner User Guide

Page 7

1. Press to Open

2. Tap and shake
to remove dust

Содержание VCU10P













Отзывы: