background image

Original Instructions

Tesco CDGT0216

3

7. Preparation

The  Grass  Trimmer  must  be  fully  assembled 

• 

before connection to the power supply.
Thoroughly inspect the area where the Grass 

• 

Trimmer is to be used and remove all objects 

which can be thrown by the Grass Trimmer.
Before  use,  check  the  supply  and  extension 

• 

cord for signs of damage or aging. If the cord 

becomes damaged during use, disconnect the 

cord  from  the  supply  immediately.  DO  NOT 

TOUCH  THE  CORD  BEFORE  DISCONNECTING 

THE  SUPPLY.  Do  not  use  the  machine  if  the 

cord is damaged or worn.

8. Operation

Be  familiar  with  the  controls  and  the  proper 

• 

use of the equipment.
Only operate the Grass Trimmer in daylight or 

• 

in good artificial light.
Avoid  operating  the  Grass  Trimmer  in  wet 

• 

grass.
Do  not  overreach,  keep  proper  footing  and 

• 

balance at all times.
Always be sure of your footing on slopes.

• 

On steep slopes cut across the slope, never in 

• 

an up and down direction.
Walk,  never  run  when  operating  the  Grass 

• 

Trimmer.
Do  not  cross  roads  or  gravel  paths  while 

• 

operating Grass Trimmer.
Never operate the Grass Trimmer with defective 

• 

guards or shields.
Do  not  put  hands  or  feet  near  or  under  the 

• 

trimming head.
Always  check  that  the  switch  is  in  the  OFF 

• 

position  before  plugging  in  the  tool  to  the 

power supply. Do not carry a plugged in tool 

with your finger on the switch.
Never hold the cutter head above foot height 

• 

or point it towards people or animals when in 

use.
Never touch the cutting line while the tool is 

• 

running. 
Do not put the tool down until the cutting line 

• 

has come to a complete standstill.
Be  careful  not  to  touch  the  line  trimming 

• 

blade.

Make  sure  that  all  moving  parts  have  come  to  a 

complete  stop  and  disconnect  the  Grass  Trimmer 

from mains power:

Whenever  you  leave  the  Grass  Trimmer 

• 

unattended.
Before  checking,  cleaning  or  working  on  the 

• 

Grass Trimmer.
Cleaning or when clearing a blockage.

• 

Adjusting the working position of the cutting 

• 

attachment.
After striking a foreign object. Inspect the Grass 

• 

Trimmer for damage and make repairs before 

operating again.

If  the  Grass  Trimmer  starts  to  vibrate  abnormally, 

disconnect  it  from  mains  power  and  (check 

immediately):

Inspect  the  Grass  Trimmer  for  signs  of 

• 

damage.
Replace or repair any damaged parts.

• 

Check the Grass Trimmer for and tighten any 

• 

loose parts.
Thoroughly  inspect  the  area  to  be  trimmed, 

• 

remove  all  stones,  sticks,  string,  wire  and 

any  other  objects  that  could  hinder  your 

trimming.

Содержание CDGT0216

















Отзывы: