TESA-hite Magna 400 / 700
27
Detailed procedure of the continuous display mode
Detailed procedure of the continuous display mode
Detailed procedure of the continuous display mode
Detailed procedure of the continuous display mode
Probe/Contact
Display
Active keys
Comments
mm /in
Switch-on auto Print mode
Establish the probe constant
Enter in ZZ mode
Introduction of a PRESET
If
If
If
If you enter from St 2 into the ZZ mode, the probe constant will be memorised.
you enter from St 2 into the ZZ mode, the probe constant will be memorised.
you enter from St 2 into the ZZ mode, the probe constant will be memorised.
you enter from St 2 into the ZZ mode, the probe constant will be memorised. B
B
B
By the exit of
y the exit of
y the exit of
y the exit of
the ZZ mode the instrument will return in St 2.
the ZZ mode the instrument will return in St 2.
the ZZ mode the instrument will return in St 2.
the ZZ mode the instrument will return in St 2.
Attention to take again the probe constant if you have moved or changed the gauge head.
Attention to take again the probe constant if you have moved or changed the gauge head.
Attention to take again the probe constant if you have moved or changed the gauge head.
Attention to take again the probe constant if you have moved or changed the gauge head.
mm /in
Enter in St 1 mode
Establish the probe constant
Enter in ZZ mode
Introduction of a PRESET
mm /in
ZZ
ZZ
ZZ
ZZ mode
mode
mode
mode
Continuous display
Continuous display
Continuous display
Continuous display
Return in St 2 mode
Set the display to zero
Introduction of a PRESET
mm /in
Enter in St 1 mode
Establish the probe constant
Enter in ZZ mode
Introduction of a PRESET
In ZZ mode, it is also possible to measure parallelism deviations (see chapter 4.13)
mm
mm
mm
mm
