Then pls press
REC
ERASE
(INTV) button to save the set value. While in the
set mode, if users intend to escape from the mode and don’t want to save
the value, users can press
ON
HOLD
OFF
to end it.
Note : In the set mode, if users don’t push any button in 30 seconds, then it will
escape from set mode and enter into temperature measurement mode.
8. BATTERY REPLACEMENT
(1). As battery power is not sufficient, LCD will display replacement with one
new battery type 9V is required.
(2). Press bottom cover and push in the direction of the arrow to open.
(3). Disconnect battery from instrument and replace with a standard 9-Volt
battery and replace bottom cover.
9. OPTIONAL ACCESSORY
K ( CA ) type thermocouple.
Model
Range
Tolerances
Description
TP-K01
Bead probe
-50
℃
to 200
℃
-58
℉
to 392
℉
±
2.2
℃
or
±
0.75
％
(
±
3.6
℉
or
±
0.75
％
)
with Teflon tape insulation.
Maximum insulating
temperature : 260
℃
TP-K02
immersion
probe
-50
℃
to 1000
℃
-58
℉
to 1832
℉
±
2.2
℃
or
±
0.75
％
(
±
3.6
℉
or
±
0.75
％
)
3.2
φ×
150
㎜
metal
sheath 100
㎝
Compensating wire
TP-K03
Surface probe
-50
℃
to 750
℃
-58
℉
to 1382
℉
±
2.2
℃
or
±
0.75
％
(
±
3.6
℉
or
±
0.75
％
)
100
㎝
Compensating wire
12.5
φ
x 94
㎜
handle
10
TP-K01:
Available for general condition, especially for complex
and any place hard to reach.
TP-K02:
Available for temperature measurement of liquid, gels or air.
TP-K03:
Available for flat or curved surface measurement.
11
+
