Teryair DP 25 ALS Скачать руководство пользователя страница 9

Страница: 9 / 33

FF-MM-326-REV -01

Page 9

Operation and Maintenance Guide SDP 25 Metal Series

d. Now with the help of two spanner hold one of

the across flat of one outer flange (5) and ro-

tate the second outer flange (5) to disassemble

it from the shaft (15). Remove the diaphragm

(12), inner flange (6) & washer (10). Now

pull out the shaft (15) out of the shaft housing

assembly (A).

*For ALT/SST series hold one of the across flat

of hex bolt (9) and rotate the other side hex

bolt (9) to disassemble it from the shaft (15)

Remove the outer flange (5), Backup dia-

phragm (12) PTFE Diaphragm (12A), inner

flange (6) & washer (10). Now pull out the

shaft (15) out of the shaft housing assembly

(A).

e. For other side Diaphragm removal, Now hold

the shaft (15) in a vice with proper packing.

Care must be taken not to damage the shaft

(15) outer surface. Now remove the outer

flange (5) with spanner to disassemble it from

shaft (15) & remove parts same as above.

*For ALT/SST hold the shaft (15) in a vice

with proper packing. Care must be taken not

to damage the shaft outer surface. Now remove

the Hex bolt (9) with spanner to disassemble it

from shaft (15) & remove parts same as above.

f. Now replace the diaphragms (12). Ensure that

diaphragm orientation is correct, i.e. For ALB/

ALN/ALV. The sticker side of the diaphragm

(12) to be located on outer flanges (5). Now

assemble the inner flange (6), washer (10) &

shaft (15) in reverse manner and remove the

half shaft assembly from vice.

* Refer image for ALT & SST model, Hold the

shaft (15) in vice, then install inner flange (5),

new Backup diaphragm (12) & PTFE Dia-

phragm (12A) & outer flange (5) in reverse

manner and remove the half shaft assembly

from vice.

* For ALS/ ALH model AIR SIDE marking to

be located toward the shaft housing (A).

g. Lubricate the edge of the shaft (15) with

specified lubricant. Slowly insert the shaft with

rotating motion. (Refer Image of step “c”)

h. Once the half shaft open portion comes out

of the bush, follow the procedure in reverse

manner as described in step (c),(b) & (a) and

assemble the pump.(Refer Image of steps “c, b

& a”)

2. Replacement Of Shaft O-Rings

a. For removing the rubber rings from bush, first

follow the steps a, b c & d from the diaphragm

replacement.

b. Now remove the seals (14) with the help of

needle Nose pliers. Care should be taken not

to damage the inner face of bush.

c. Once all the old seals are have been removed,

the inside of the bushing should be cleaned

to ensure no debris is left that may damage to

new seals (Pressurized air is preferable).

d. These following tools can be used to aid in the

installation of new seals:

• Needle Nose pliers

• Phillips Screwdriver

• Electrical Tape

Содержание DP 25 ALS


































Результаты поиска

Содержание DP 25 ALS

Отзывы:

Бренды по названию

Популярные бренды

Teryair DP 25 ALS, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание DP 25 ALS

Отзывы:

Бренды по названию

Популярные бренды