FF-MM-314-REV - 06
Page 6
Operation and Maintenance Guide ERDS 84 Electric Rotary Deck Scalers
Important Note
• Please ensure socket side connections are
correctly done. After connections, please
ensure motor rotation is as indicated by
the arrow on the product.
• If wiring connections are incorrectly
done, the risk of reverse direction rota-
tion of the motor will result in perma-
nent damage to equipment and can be a
hazard.
• For correct connections read the man-
ual. This is applicable for 220V/440V
(3Phase) motors.
• Before beginning operation always ensure
that direction of rotation is as indicated
by the arrow shown. Incorrect rotation
will cause permanent damage to equip-
ment and can be a hazard.
7. Turn the height dial counter clockwise
completely and make sure that the cutter
wheels are off the ground.
• Grip the handle firmly and press the start
button (Green) located on the starter
(44).
• Once the deck scaler motor starts, slowly
turn the height dial (3) clockwise until
the rotating cutter engages with the
surface. The scaler will begin to pull
forward gently. Adjust the height dial (3)
and the traverse speed to achieve the level
of descaling required.
• To shut down, rotate the height dial (3)
counter clockwise to disengage the drum
and press the red button to stop the
motor.
* See how to adjust the cutting depth.
