Tertium BlueBerry UHF, Руководство пользователя

Страница: 8 / 15

BlueBerry UHF v.2.0 – User Manual ver. 0.6
June 2011
7
Configuration of BlueBerry
BlueBerry is an RFID reader able to read one or more TAGs and to transmit data via Bluetooth or
USB to any device provided with such interfaces.
BlueBerry is a highly configurable device: it is possible to choose scanning activation mode, the
scanning timeout, the enabling/disabling of the signalling LED and the acoustic beeper, the frame
format, etc.
The configuration can be done through the serial commands, as described in the document
TERTIUM_RFID_Reader_Protocol.pdf
or more simply through the
TT_RFID_Configurator
application supplied with the CD.
To configure BlueBerry using
TT_RFID_Configurator,
connect BlueBerry to the computer with the
USB cable and execute the application; in the section “Device selection”, select the BlueBerry UHF
device to configure and the COM to which it is connected. Click on the “Connect to device” button.
If the connection is successful, the LED next to the Com becomes green and the state of the
device and the firmware version will be indicated below (e.g. “Status: Connected v1.4”).
Click on the button “Read config” to read the current configuration of BlueBerry.
The
TT_RFID_Configurator
screenshot with the default configuration of BlueBerry UHF is as
follows.
.
Figura 3: TT_RFID_Configurator
To save the changes made in the Bluetooth, Auto off and Set mode fields, click on the button
“Write config” .