Tertium BlueBerry UHF, Руководство пользователя

Страница: 11 / 15

BlueBerry UHF v.2.0 – User Manual ver. 0.6
June 2011
10
− Selecting “03” in the field, BlueBerry sends the ID of the identified TAGs, each one with an
Horizontal Tab as a prefix and CRLF as suffix.
Maximum number of TAGs to scan
Figura 7: TT_RFID_Configurator - setting of the maximum number of scanned IDs to be sent
It is possible to limit the number of scanned IDs to send modifying the field indicated in Figure 7.
− Writing “00” in the field, the reader will return all the IDs of the identified TAGs (the maximum
number of detectable TAG is 6).
− Writing “01” in the field, if the reader identifies only one TAG, it will returns its ID; if it
identifies more than one TAG, it will send an error string as result.
−
Writing a number n in the field, the reader will return n ID of the identified m TAGs (with
m>n).
Baudrate
Figura 8 : TT_RFID_Configurator - configuration of the baud rate of the USB serial interface
Modify the Baudrate field for change the speed of the USB serial interface.
Click on the “Read” button to read the current baudrate.
Select one of the possible speeds from the menu and click on “Write” to save the setting.
The new baudrate will be activated in the following switching on of the device.
Sending commands w ith TT_RFID_Configurator
With the
TT_RFID_Configurator
application, it is possible to send the commands of the TERTIUM
Technology protocol to BlueBerry (see
TERTIUM_RFID_Reader_Protocol.pdf
). Simply insert the
command in the field next to “Send” button, Figure 3, and click on the “Send” button. The sent
command and the response of the reader or an error message are shown in the underlying
window .