37
/
49
Figure 44 APIS_BASE setting page
2)
TCP/UDP client
Click the [Connect] button to the right of required TCP/UDP Client. The IO Settings
screen will appear. Select the connection protocol from the drop-down list. Enter the
IP and Port of the target server. Configure messages that you want to output to the
target server. Click [Confirm] button to save and complete the connection.
Figure 45 TCP/UPD client setting page
Note
: If the receiver and server are under the same Local Area Network (LAN), users
can use the IP address in LAN of the server with any Port. However, if the receiver
and server are under the two different LAN, users should use the public IP address of
the server and configure the port mapping of the server.
3)
TCP server/NTRIP caster
Click the [Connect] button to the right of required TCP server/NTRIP caster. The IO
Settings screen will appear. Select one of the connection protocols between NTRIP
and TCP. Configure the other related parameters. Click [Confirm] button to save the
settings and open the server.
Connection protocol: NTRIP
