10
/
49
5.
Connect an adapter to TX204 and connect the COM1 (under the RJ-45 port) to a
computer, after the RTK corrections configuration is finished, disconnect the
COM1 to the computer and connect a proper radio to it.
6.
Go to Network Settings -> Mobile network Settings to check the network status,
ensure the GPRS model status is ON, Auto Start is Yes and Dialing status is OK.
7.
Go to I/O Settings -> TCP/UDP_Client1/Ntrip Server, select Connect in the
modify menu and ensure the RTK corrections are transmitted to the server.
1.2.3
Work as a post-process data collector
There is a 16GB flash in the TX204, it can be used as a data collector to save raw
measurements for post-processing. The steps are given below:
8.
An antenna is installed.
9.
Power on the receiver, go to Data recording -> Log settings, press Modify in the
Setting Parameter, after all the parameter is set, press ON in the Switch.
After all the data is saved, plug the adapter to TX204, and you can connect the USB
port in the adapter to your computer and copy/delete the files in the flash memory.
1
Note 1:
The SIM card must support GSM/GPRS/EDGE.
