33
/
49
In this screen, you can set all data logging parameters, and determine whether the
recording files will be affected by the FTP Push. The parameters are mainly as
follows.
•
On or Off: Select [Yes] or [No] to determine whether to log data when the Master
Log Switch is ON.
•
Recording Name: The name of this storage thread.
•
Sample Interval: Select the observable rate from the dropdown list.
•
Store Location: Determine whether to store at internal storage or external storage.
•
Start Time: Set the start time of data log in UTC. Select [Yes] or [No] option
below to determine whether to start logging from the set time.
•
Duration Time: Set the time interval of recording.
•
Storage: Set the storage limit of this thread.
•
Recycle Storage: Select [Yes] or [No] to determine whether to auto delete old
files if the storage space is full.
•
Storage Format: The default format of recording files is HCN.
•
FTP Push: Decide whether to push the stored files to the FTP server of your
choice.
Click [Save] button to save the settings and back to the Log Settings screen. Also,
users can click [Back] button to abandon the changed settings and back to Log
Settings screen.
Note
: to delete the record data, you can remove all the eight record data by the total
button clear all accounts. Also you can delete each record data by clear button under
the selected thread.
To delete the recorded files of ANY storage thread, click the [Clear] button to the right
of the required storage thread.
To delete the recorded files of ALL storage threads, click [Clear All Accounts] button.
5.3.4.2
FTP Push Settings
Use this screen to configure the receiver to push stored files to the FTP server you
choose. Only files that are configured to use FTP push are transmitted. Click [Modify]
button to the right of the required FTP server and the FTP Push Settings screen
appears.
