Terratek TTRTK, Руководство пользователя

Страница: 16 / 24

15
26. NEVER LEAVE TOOL RUNNING UNATTENDED. Turn power off. Don’t leave tool until it
comes to a complete stop.
27. Double Insulation eliminates the need for the three wire grounded power cord and
grounded power supply system.
This power tool is supplied with all the relevant safety guards and features, it should be
checked before every operation, this manual should be read and kept in a safe place. Whilst
we warn of all the possible risks attached to using power tools any operator must have read
and understood the manual and apply their own caution and common sense when using this
power tool.
Following this guide will greatly reduce your risk of electric shock or injury.
Only use qualified repair agents to service this power tool.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power tool or extension cord.
Rotary Mini grinder
ĚĚŝƟŽŶĂůƐĂĨĞƚLJ/ŶƐƚƌƵĐƟŽŶƐ
Hold power tool by the insulated gripping surfaces, when performing an operation
where the cutting tool may run into hidden wiring. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the operator. Do not drill, fasten or break
into existing walls or other blind areas where electrical wiring may exist. If this situation is
unavoidable, disconnect all fuses or circuit breakers feeding this worksite.
Striking or cutting into a gas line will result in explosion. Water entering an electrical device
may cause electrocution.
Always hold the tool firmly with both hands for maximum control. Keep proper
footing and balance at all times. This enables better control of the power tool in
unexpected situations.
Use a metal detector to determine if there are gas or water pipes hidden in the work
area or call the local utility company for assistance before beginning the operation.