16
2. Check regularly for any dust particles entering the grills around the motor and the
trigger switch. Use a soft brush to remove any dust particles. Wear safety glasses to
protect your eyes whilst cleaning.
3. Regularly wipe any saw dust from the fence. A build-up of dust on the fence can
prevent accurate cutting.
4. Monitor the dust bag and empty when approximately half full. Always empty into an
appropriate container
5(0(0%(5GXVWFDQEHKRWDQGFDXVH¿UH
5. If the blade has become dirty, use a blade cleaner (not included) to clean it. Dirty
blades will bind more easily, and will more often overheat and burn the wood as it
cuts. Overheated blades dull more easily.
6. If the Blade has become dull, replace it. Dull blades will cause increased tear-out
and ragged edges on the cuts.
7. Lubricate all moving parts at regular intervals
8. To clean the body of the power tool, only use a soft damp cloth. Do NOT immerse in
water. A mild detergent can be used but NOT petrol or any alcohol based product.
9. After extensive use of this power tool the grease in the gearbox will require replacing
10. Should the power cord become damage
GRQO\DOORZDIXOO\TXDOL¿HGHOHFWULFLDQWR
replace or repair
Replacing carbon brushes
Remove and check the carbon brushes regularly. Replace when they wear down to the
limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon
brushes should be replaced at the same time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. (Fig.17) Take out the worn carbon
brushes, insert the new ones (Fig.18) and secure the brush holder caps.
Содержание TSMS300LJ
