14
Basic Cross Cutting with Fixed Blade
1. Pull the release knob and lift the saw arm.
2. Loosen the Miter Lock Knob (Fig.6)
3. Move the table to the required angle.
)XOO\WLJKWHQWKH0LWHU/RFN.QRE,IWKHWDEOHLVQRWORFNHG¿UPO\LWFDQUHVXOWLQ
personal injury).
Always Use clamp to secure the material. This clamp can be moved to either side of
the table by loosening the locking knob. Ensure this knob is retightened before using
the saw.
Support long lengths using roller support stands.
5. Turn the Laser guide on. (Fig.13)
6. Align the marked location of the cut on the material with the saw blade.
7. Grasp the operating handle and squeeze trigger to turn on the machine.
8. Allow the machine to free run to its maximum speed before making the cut.
9. Make the cut.
10. Allow blade to completely stop before raising the arm to retrieve the work piece.
IMPORTANT:
Always Use clamp to secure the material. This clamp can be moved to either
side of the table by loosening the locking knob.
Ensure this knob is retightened before using the saw.
Support long lengths using roller support stands.
Slide Cutting
1. Pull and twist the release knob (Fig.9)
2. Pull the saw arm towards you.
3. Position and lock the work piece using the clamp.
4. Grasp the operating handle and squeeze trigger to turn on the machine
5. Allow the machine to free run to its maximum speed before making the cut.
6. Press the guard release trigger
7. Make the cut.
8. Allow blade to completely stop before raising the arm to retrieve the work piece.
Angle (Bevel) Cutting
This type of cut is obtained when the Table is set at 0 degrees and the blade at any
angle required between 0 and 45 degrees left or right (dual bevel).
1. Loosen the Bevel lock. (Fig.7)
2. Move the saw arm to the required angle. (Fig.14)
3. Re-tighten the Bevel lock.
4. Grasp the operating handle and squeeze trigger to turn on the machine.
5. Allow the machine to free run to its maximum speed before making the cut.
6. Make the cut.
7. Allow blade to completely stop before raising the arm to retrieve the work piece.
Содержание TSMS300LJ
