TerraTec PHASE 26 USB, Руководство пользователя

Страница: 14 / 48

After a successful driver installation, you should verify the correct condition of your
Windows XP system. The Device Manager presents an overview of installed and
recognized hardware components of your computer. The Device Manager can be found
on the Control Panel under “System” > “Hardware”. Then click the “Device Manager”
button.
Switching operating modes.
As mentioned already, the PHASE 26 USB module registers with the operating system as
new hardware when the operating mode is switched. Because of this, we recommend that
you switch once through all of the modes right now. Remember that you can not switch
modes unless all of the programs that access the PHASE 26 USB drivers are closed
(including the PHASE 26 USB ControlPanel). Every time you switch from one mode to
another, the installation procedure repeats the steps listed above. While time-consuming
now, this will avoid the surprise (which would of course happen at the least appropriate
time) of having to install the drivers in the future. Authors remarks: Yes, I agree. This
procedure may not seem worthwhile, and can be frustrating. And things get better: If you
switch the USB port you are using, Microsoft's Windows detects all of the “devices” as
new. Unfortunately, there is nothing the TerraTec production team can do about this - so,
bear it with a grin! Everything will be just fine!
Installing the ASIO driver.
1. Disconnect the USB connection between the PHASE 26 USB System and your
computer.
2. Use the autorun software on the PHASE 26 USB product CD to launch the installation
of the ASIO driver.
3. Follow the installer software instructions in the screen.
If the ASIO mode will be changed for the first time at the device it might happen the
Windows hardware wizard pops up again. In this case simply choose the hardware
wizards automatic installation.
Congratulations!
Your PHASE 26 USB System is now available for use as an audio device in all applica-
tions. To better understand the interaction of the PHASE 26 USB System with Windows,
we recommend reading the descriptions in the driver chapter on
Ü
page 26.
14 PHASE 26 USB (English)